M3D Force Plate (Wired)

M3D Force Plate (Wired)
This portable M3D Force Plate is designed to be attached directly to the feet or slippers. The M3D does not require that the feet are placed on separate force plates and can measure walking properties on steps or slopes where it is generally difficult to install force plates.

M3D Force Plate (Wired)

The wired M3D Force Plate offers simple gait measurement by connecting the Plate to a computer with a USB cable.
The compact six-component force sensor can be used for a wide range of applications.

  • Two size options are available : 80×95 (toe) / 80×80 (heel)
  • A maximum of four Plates can be used simultaneously.
  • Inertial sensors (acceleration, gyro, geomagnetic) are integrated in each Force Plate to measure simultaneously with six force components.
  • Measured data are saved as a CSV file in chronological order to allow various types of analysis.

System Configuration

M3D Force Plate (Wired)

Specifications

Model M3D-EL-FP-U
Number of channels 21ch
Sampling frequency 1000Hz
Resolution 3-axis force sensor, 3-axis acceleration sensor: 12-bit
3-axis gyro sensor: 16-bit
3-axis geomagnetic sensor (X/Y-axis): 13-bit
3-axis geomagnetic sensor (Z-axis): 15-bit
External dimensions 
& weight		 Toe: 95(W) x 80(D) x 11(H) mm、171g
Heel: 80(W) x 80(D) x 11(H) mm、150g
(Excl. rubber parts and protrusions)
[Force Plate]
Rated capacity Fx=±500N, Fy=±500N, Fz=＋1000N,
Mx=±30N・m, My=±30N・m, Mz=±15N・m
Zero adjustment Auto-balance
Low-pass filter 200Hz, -12dB/oct
Non-linearity ±1% RO or less
[3-axis acceleration sensor]
Measurement range ±2G / ±4G / ±8G / ±16G
[3-axis gyro sensor]
Measurement range ±2000deg/s
[3-axis geomagnetic sensor]
Measurement range ±1300μT (X/Y-axis), ±2500μT (Z-axis)
External Dimension

External Dimension

Menu