USL06-H5-0.2/0.9NM Torque Sensor

USL06-H5-0.2/0.9NM Torque Sensor
The world’s smallest class of biaxial sensors with high accuracy. Dedicated to the measurement of small torque.

USL06-H5-0.2/0.9NM Torque Sensor

Features

  • 2 Low Capacity Models
    The 0.2Nm and 0.9Nm models can be adopted according to your needs.
  • Small & Light
    Our USL06-H5 sensors are small and lightweight force sensors that require the minimum amount of space in an experimental setup or a robot.
  • High Sensitivity
    Multi-axis load cells cause multiaxial interferences and require an interference correction formula to correct them. Our force sensors are calibrated one by one at our factory, and the interference correction coefficients are provided for each individual sensor to ensure accurate measurement. Non-linearity, Hysteresis and Interferences are strictly tested to be within ±1% Rated Output (RO).

Applications

  • Applications
    Alignment for a prosthetic leg
    Our 2-axis Force Sensor can be used to control the alignment of prosthesis parts so that Mx and My moments are not applied when using a prosthetic leg.
  • Applications
    Resistance force measurement of liquid (water flow, wind column)
    Measurement of moments that are applied to the support of a sample placed in the air or water. It will show the differences in resistance forces depending on the shape of samples.
  • Applications
    Measurement of the point of an action at a distance
    When a force is applied at a point away from the sensor, the longer the distance is, the larger the moment that is generated. The sensor can measure torque applied in the middle or the end of a shaft.

Specifications

Model USL06-H5-0.2NM/0.9NM
Allowable overload 150%
Non-linearity ±1% RO (after correction)
Hysteresis ±1% RO (after correction)
Interference ±1% RO (after correction)
Guaranteed temperature range 10~60℃ (no condensation)
Allowable temperature range -10~70℃ (no condensation)
Temperature shift zero ±0.05%RO/℃ or less
Recommended range of applied voltage 1~3V DC
Allowable applied voltage 5V DC
Input resistance 61~63 Ω
Output resistance 122~126 Ω
Initial disproportion ±1mv/V (±2000µε or less)
Insulation resistance 1000MΩ/50V DC or more
Cable Length: 2m External diameter:1.8mm
4-core shielded cable
External dimensions & weight USL06-H5-0.2NM:W20xD20xH5mm, 3g (excl. cable)
USL06-H5-0.9NM:W20xD20xH5mm, 9g (excl. cable)
External dimensions

outline

Menu