USX10-H10 Force Sensor

USX10-H10 Force Sensor
Small 6-axis sensor (Fz: ± 500N or ± 1500N). Often used in places where measurement of moments is required, such as climbing holds or the head of the shift lever of an automobile for stress measurement.

USX10-H10 Force Sensor

Small 6-axis sensor (Fz: ± 500N or ± 1500N). Often used in places where measurement of moments is required, such as climbing holds or the head of the shift lever of an automobile for stress measurement.

Specifications

スクロール

Model USX10-H10-500N USX10-H10-1.5KN
Rated capacity Fx・Fy ±250N ±750N
Fz ±500N ±1500N
Mx・My ±4N•m ±12N•m
Mz ±2N•m ±6N•m
Rated output Fx・Fy Approx. 0.40mV/V (800με) Approx. 0.40mV/V (800με)
Fz Approx. 0.80mV/V (1600με) Approx. 0.80mV/V (1600με)
Mx・My Approx. 1.2mV/V (2400με) Approx. 1.2mV/V (2400με)
Mz Approx. 1.5mV/V (3000με) Approx. 1.9mV/V (3800με) 
Allowable overload 150%
Non-linearity ±1.0% RO (after interference correction)
Hysteresis ±1.0% RO (after interference correction)
Interference ±1.0% RO (after interference correction)
Guaranteed temperature range 10 to 60℃ (No condensation)
Allowable temperature range -10 to 70℃ (No condensation)
Temperature effect on zero ±0.05% RO/℃
Temperature effect on output ±0.05%/℃
Recommended applied voltage 1 to 3V DC
Allowable applied voltage 6V DC
Input resistance 49 to 52Ω (common to BV)
Output resistance Fx・Fy・Mx・My: 116 to 124Ω 
Fz・Mz: 234 to 246Ω 
Initial disproportion ±1.5mV/V (±3000με)
Insulation resistance 1000MΩ / 50V DC or more
Cable 8-core shielded cable (2m)
Connector: 8-pin MD connector
External dimensions W30×D30×H10(mm)  
Weight 15g (excl. cables) 40g (excl. cables)
External Dimension

External Dimension

Menu