Ultra-compact 6CH Strain Amplifier & Logger (Standalone Type)PDL-06-SA
-
6CH Strain Gauge Sensor Amplifier & Data LoggerPDL-06-SACatalog
6CH Strain Gauge Sensor Amplifier & Data LoggerPDL-06-SACatalogDownload
6-channel strain amplifier capable of standalone measurement
All operations are completed via buttons on the unit, enabling fully PC-free operation.
With REC/ZERO balance buttons on the device, measurements can be started with a single press—even without a computer.
Recommended for
- Those who want to measure data in the field
- Those who want to measure flying objects such as drones
- Those who have trouble handling cables in rotating body measurements
- Those interested in embedding sensors in sports equipment or robots for measurement
Key Features
- Fully PC-free standalone measurement
- Equipped with physical buttons (REC / ZERO balance / TRIG standby)
- Wireless communication supported (Bluetooth for parameter settings and waveform monitoring)
- Built-in battery
- On-device recording (SD card)
- High sampling rate up to 1 kHz
- Up to 10 units can be connected
Measurement is as simple as pressing a button
We specialize in compact multi-axis force sensors. Many of our products are used in field experiments, where the PDL-06-SA demonstrates its full potential.
For example, in the sports field, force sensors are often embedded in equipment to measure loads on each component. In such cases, cable handling can be cumbersome, and bringing a PC on-site and operating it adds further complexity. Wireless communication issues can also become a concern.
The same applies to measurements on flying objects such as drones. Not only does cable-free operation help, but being able to measure using physical buttons further improves usability.
The PDL-06-SA is a digital strain amplifier. Once the amplifier is configured, it can be operated without a PC using only the physical buttons on the unit. LED indicators allow users to check device status and battery level. It is compatible with all our force sensors and can be used immediately upon connection.
*Initial amplifier settings require dedicated software. Configure via Bluetooth connection to a PC.
Operation list
- Power ON/OFF
- Start REC
- TRIG standby
- Stop REC
- ZERO balance
Installation Example
Compact body that does not get in the way and is easy to handle.
Application Fields
Specifications
| Product Name | Portable Data Logger 6ch |
|---|---|
| Model | PDL-06-SA |
| Number of Measurement Channels | 6 ch |
| Applicable Sensors | Strain Gauge Sensors |
| Dimensions | 45(W) × 83.5(D) × 23.9(H) mm (excluding protrusions) |
| Weight | 64 g |
| Resolution | 16 bit |
| Sampling Frequency | Selectable: 10 / 50 / 100 / 500 / 1000 Hz *When saving to SD card: max. 100 Hz |
| Internal Cross-talk Compensation | Yes |
| Analog Output | None |
| Communication Method | Bluetooth |
| Applicable Bridge Resistance | 120–700 Ω |
| Measurement Range | ±5000 με |
| Zero Adjustment Range | ±5000 με |
| Zero Adjustment | Batch auto-balance via control software |
| Excitation Voltage | DC 2V |
| Analog Low-pass Filter | Cutoff frequency: 200 Hz, -12 dB/oct, Bessel type |
| Operating Temperature / Humidity | 0–50°C, 20–85% RH (no condensation) |
| Power Supply | Powered by built-in lithium battery (charged via micro-USB) Continuous operation: approx. 1.5 hours Charging time: approx. 2 hours |
| Data Storage | microSDHC card (32GB) |
| Trigger | Infrared input |
| Connector | Strain InputHR212 connector 8-pin (HRS) ×2 Infrared input |
| Maximum Number of Units Connected | 10 units |
| Included Items | Main unit (with microSDHC card) / Bluetooth-USB dongle / SD conversion adapter USB charging cable 1.5 m (USB Type-C ⇔ USB Type-A) CD-ROM (control software & instruction manual PDF) |
Appearance
Click to open PDF
